{"title":"ENGINE ACCESSORIES","description":"IE engine accessories for your VW or Audi includes everything from valve covers, catch can kits, breathers, specialty adapters, and more to clean up your engine bay, set up a breather system, or help finish a custom project. Explore our huge line of in-house USA made parts to complete your next project!","products":[{"product_id":"ie-vacuum-pump-blockoff-vw-25l-5cyl","title":"IE Vacuum Pump Block-off Plate for MK5\/6 2.5 5 Cylinder Engines","description":"\u003ch2\u003ePRODUCT FEATURES \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on vacuum plate delete solution\u003c\/li\u003e\n\u003cli\u003ePerfect for 2.5L engine swaps\u003c\/li\u003e\n\u003cli\u003eRemoves faulty stock vacuum pump\u003c\/li\u003e\n\u003cli\u003eAllows traditional brake booster to manifold setup\u003c\/li\u003e\n\u003cli\u003eOil galley is blocked off to maintain proper oil pressure\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined from 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eO ring sealed for leak-free operation\u003c\/li\u003e\n\u003cli\u003eIncludes all stainless mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eWHAT IS A VACUUM PUMP?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAll modern brake systems require vacuum pressure to the brake booster for proper brake performance. Typically, this vacuum pressure is supplied to the brake booster from the intake manifold. On the 2.5L engines, VW equipped the 07K 5 Cylinders with a vacuum pump installed to the engine that supplies vacuum to the brake booster instead. These pumps are failure prone, leak oil, expensive to replace, pull power from the engine, and are not needed for engine swaps.  \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eEASY VACUUM PUMP DELETE SOLUTION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe IE 2.5L Vacuum Pump Block-off Plate is used to remove the factory vacuum pump found on 07K 5 cylinder engines. This is an inexpensive solution for those looking to remove the pump when swapping a 2.5L engine into another car, or looking to delete the failure prone expensive vacuum pump. Our high-temp o ring sealed plate is the original and best with a collar that slides into the engine to block off the oiling galley for the original pump, ensuring there are no oil pressure issues.  \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eREMOVES POWER BRAKES\u003c\/h2\u003e\n\u003cp\u003eDeleting the pump is desired for engine swaps into vehicles that already have a regular brake booster setup. If you are attempting to use this plate as a inexpensive repair for a failed pump on your 2.5L in the original chassis, be aware this will remove all power brake assist. Custom work to plumb the brake booster to the intake manifold will be required to regain proper brake function after deleting the vacuum pump.\u003cem\u003e Running without the brake booster connected to the intake manifold or vacuum pump is highly discouraged and dangerous, especially on a street car.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVW - Golf 2010-2014 (MK6) 2.5L\u003c\/li\u003e\n\u003cli\u003eVW - Rabbit 2006-2009 (MK5) \u003cspan\u003e2.5L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) \u003cspan\u003e2.5L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) \u003cspan\u003e2.5L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eVW - Jetta SportWagen 2011-2014 (MK6) \u003cspan\u003e2.5L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eVW - Beetle 1998-2011 (1C - 9C - 1Y) \u003cspan\u003e2.5L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eVW - Beetle 2011-2015 (MK2) \u003cspan\u003e2.5L\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20196792500335,"sku":"IEBAVB4","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_1446_2.1505842369.jpg?v=1569297855"},{"product_id":"ie-breather-adapter-vw-audi-20t-fsi-25l-5cyl","title":"IE Block Breather Adapter for 2.0T FSI and 2.5L 5 Cyl Engines","description":"\u003cp\u003eImprove the look of your engine bay with braided lines or install a custom catch can setup on your 2.0T FSI or 2.5L 5 cylinder engine easily with this simple breather adapter. This fitting clips to the factory oil filter housing converting it to a -10AN threaded male outlet. Perfect for AN hose ends and fittings.\u003c\/p\u003e\n\u003ch2\u003eCONVERT YOUR BREATHER TO -10 AN\u003c\/h2\u003e\n\u003cp\u003eIE's -10AN Block Breather Adapter is a quick and simple solution to add a threaded outlet fitting to your stock block breather on the 2.0T FSI (EA113) and 2.5L 5 cylinder (07K) engines. Perfect solution for custom breather systems or catch can setups. This in-house CNC machined fitting installs in place of the factory plastic hose on your stock oil cooler housing. This provides you with a -10AN threaded outlet for use with a standard AN hose end or fitting of your choice.\u003c\/p\u003e\n\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConverts your breather to AN hose ends and lines\u003c\/li\u003e\n\u003cli\u003ePerfect for your custom catch can project\u003c\/li\u003e\n\u003cli\u003eFast and easy o ring design installation\u003c\/li\u003e\n\u003cli\u003eConverts factory block breather to -10AN fitting\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined from 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eBright black anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEASY INSTALLATION\u003c\/h2\u003e\n\u003cp\u003eInstallation of the fitting itself takes only a few minutes with no welding, drilling, or modification required. Simply remove the factory plastic hose and replace it with your new o ring sealed IE breather adapter securing it with the supplied clip. This will provide you with a leak-free lifetime solution -10AN breather outlet.\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAUDI - A4 2005-2008 (B7) 2.0T TFSI engine\u003c\/li\u003e\n\u003cli\u003eAUDI - A6 2005-2011 (C6) 2.0T TFSI engine\u003c\/li\u003e\n\u003cli\u003eAUDI - A6 Allroad 2005-2011 (C6) 2.0T TFSI engine\u003c\/li\u003e\n\u003cli\u003eAUDI - TT 2008-2015 (MK2 - 8J) 2.0T TFSI (EA113 timing belt driven) engines\u003c\/li\u003e\n\u003cli\u003eAUDI - TTS 2008-2015 (MK2 - 8J) 2.0T TFSI engine\u003c\/li\u003e\n\u003cli\u003eAUDI - A3 2006-2013 (MK2 - 8P) 2.0T TFSI (EA113 timing belt driven) engines\u003c\/li\u003e\n\u003cli\u003eAUDI - S3 2006-2013 (MK2 - 8P) 2.0T TFSI engine\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T TFSI (EA113 timing belt driven) engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2012 (MK6) 2.0T TFSI engine\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T TFSI (EA113 timing belt driven) \u0026amp; 2.5L 5 cylinder engines\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T TFSI (EA113 timing belt driven) engines\u003c\/li\u003e\n\u003cli\u003eVW - EOS 2006-2015 (1F7) 2.0T TFSI (EA113 timing belt driven) engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf 2010-2014 (MK6) 2.5L 5 cylinder engines\u003c\/li\u003e\n\u003cli\u003eVW - Rabbit 2006-2009 (MK5) 2.5L 5 cylinder engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta SportWagen 2011-2014 (MK6) 2.5L 5 cylinder engines\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003ePlease check and confirm you have room on your engines breather to fit this part plus fitting. You'll need a minimum of 4\" or so space from the end of the factory breather to get a hose on there. Some models have SAI pumps and other hardware in the way. \u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20196912398447,"sku":"IEBAVB6","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_7906_2.1505845802.jpg?v=1569297857"},{"product_id":"20t-fsi-ie-valve-cover-crossover-tube-relocation","title":"EVAP Crossover Tube Relocation Kit for 2.0T FSI with IE Valve Cover","description":"\u003cp\u003eWhen you install an Integrated Engineering billet valve cover on your 2.0T FSI it requires that you reroute the EVAP solenoid hose. This kit is designed to replace the factory EVAP crossover tube that runs through the factory valve cover. It includes a custom CNC machined barb that clips directly to the factory EVAP hose, an adequate length of silicone hose to reroute around the engine to the turbo inlet, and two hose clamps to ensure the hose stays safely secured.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCustom CNC machined barb for easy installation\u003c\/li\u003e\n\u003cli\u003e3' Length of silicone vacuum hose\u003c\/li\u003e\n\u003cli\u003eClamps to secure hose\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20197922930799,"sku":"IEBAVC11","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_0035_2.1505849966.jpg?v=1569297862"},{"product_id":"ie-pcv-solution-20t-fsi","title":"IE PCV Solution Kit for 2.0T FSI Engines","description":"\u003cp\u003eSave your engine from an oily mess, built-up crankcase pressure, rough idle, fuel economy, and boost loss with a quick and simple install that takes less than 20 minutes on average. You will immediately notice a drastic improvement in drivability and power if your valve was leaking previously.\u003c\/p\u003e\n\u003ch2\u003eSTOCK PRESSURE RELIEF VALVE ISSUES\u003c\/h2\u003e\n\u003cp\u003eOne of the most common failures on the 2.0T FSI engine is the factory pressure-relief valve. These valves are in place to recirculate crankcase gases into the intake manifold once they open. Although this works fine for a few thousand miles, they begin to leak over time and cause boost to go past the valve into the valve cover. This not only causes an oily mess in the engine bay from crankcase pressure but a rough idle, fuel economy decline and boost loss. With boost pressure far below where it should be, it is common to notice significant power losses and poor drivability.\u003c\/p\u003e\n\u003ch2\u003eIE PCV SOLUTION PLATE\u003c\/h2\u003e\n\u003cp\u003eUsing our kit, you are able to completely remove the pressure-relief valve and replace it with a billet aluminum plate. This allows the factory breather system to function properly while eliminating the failure-prone relief valve. With the hose between the valve cover and intake manifold completely eliminated, the included boost cap is used to block off the hose connection on the end of the intake manifold. Our billet cap features a tapped hole that can be plugged or used to plumb a boost gauge, compared to competitor’s products that do not offer a provision for plumbing a boost gauge.\u003c\/p\u003e\n\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSave your engine from a faulty pressure relief valve\u003c\/li\u003e\n\u003cli\u003eDirect replacement \u0026amp; quick installation\u003c\/li\u003e\n\u003cli\u003eIE boost cap has an optional outlet for a boost gauge\u003c\/li\u003e\n\u003cli\u003eBright black anodized finish\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eAudi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eAudi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eVW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e*\u003cem\u003e\u003cstrong\u003eNOTE: IE PCV Solution Kits only work on early model 2.0T EA113 engines. You can verify you have\u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003e the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1\/Gen2 TSI engine and is not compatible with this product.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20198200311919,"sku":"IEBAVC17","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_7417_2.1505843381.jpg?v=1569297863"},{"product_id":"ie-breather-blockoff-vw-audi-20t-fsi-tsi","title":"IE Rear Breather Blockoff Plate for 2.0T FSI \u0026 TSI (Gen1 \u0026 2) Engines","description":"\u003cp\u003eThis block-off plate is used when removing the rear breather from the factory turbo inlet on all transverse and longitudinal 2.0T FSI (EA113) and TSI (EA888 Gen1 \u0026amp; Gen2) engines. This is typically done when installing a billet valve cover and\/or a custom catch can setup and the factory line from the valve cover is removed. Uses a Viton o ring to provide a leak-free connection.\u003c\/p\u003e\n\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasily BLock off rear breather for a custom breather setup\u003c\/li\u003e\n\u003cli\u003eMade in house from aircraft aluminum\u003c\/li\u003e\n\u003cli\u003eBlack anodize finish\u003c\/li\u003e\n\u003cli\u003eIncludes o ring and bolts\u003c\/li\u003e\n\u003cli\u003eDirect fit, no modifications needed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20199375143023,"sku":"IEBAVC18","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBAVC18_1.jpg?v=1569297872"},{"product_id":"ie-boost-cap-vw-audi-20t-fsi-tsi-25l-5cyl","title":"IE Boost Cap For FSI, TSI, and 2.5L 5CYL Engines","description":"\u003cp\u003eWhen installing a catch can setup, PCV delete plate, or billet valve cover you will be left with an open port on the stock intake manifold on VW\/Audi 2.0T FSI\/TSI and 2.5L 5 cylinder engines. This in-house CNC machined aluminum IE Boost Cap is a simple o ring sealed solution to block off the remaining port completely or turn it into a simple vacuum tap for installing a boost gauge.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eUse the IE Billet Boost Cap to securely block off the intake manifold PCV inlet port when the factory PCV system has been removed. In-house CNC machined and o ring for a reliable leak-free seal. The cap is a quick installation using a factory style clip that takes only seconds to install. All installation hardware is included to completely block off the PCV manifold port or to convert it to a boost source for gauges or engine management systems.\u003c\/p\u003e\n\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits all FSI\/TSI 2.0T and 2.5L 5CYL engines\u003c\/li\u003e\n\u003cli\u003eEasy Installation, requires no tools to install\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined aluminum\u003c\/li\u003e\n\u003cli\u003eSleek black anodized finish\u003c\/li\u003e\n\u003cli\u003eO ring and securing clip install hardware included\u003c\/li\u003e\n\u003cli\u003eThreaded plug or vacuum tap hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2005-2008 (B7) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A4 2009-2015 (B8 - B8.5) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A4 Allroad 2009-2015 (B8 - B8.5) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A5 2008-2015 (B8 - B8.5) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2005-2011 (C6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 Allroad 2005-2011 (C6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2012-2015 (C7 - C7.5) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - TTS 2008-2015 (MK2 - 8J) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - S3 2006-2013 (MK2 - 8P) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - Q3 2011-2015 (8U) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eAudi - Q5 2008-2015 (8R) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2012 (MK6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2010-2014 (MK6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta SportWagen 2011-2014 (MK6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - CC 2009-2015 (3C8) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - EOS 2006-2015 (1F7) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Beetle 2011-2015 (MK2) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T engines\u003c\/li\u003e\n\u003cli\u003eVW - Golf 2010-2014 (MK6) 2.5L engines\u003c\/li\u003e\n\u003cli\u003eVW - Rabbit 2006-2009 (MK5) 2.5L engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.5L engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6) 2.5L engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta SportWagen 2011-2014 (MK6) 2.5L engines\u003c\/li\u003e\n\u003cli\u003eVW - Beetle 1998-2011 (1C - 9C - 1Y) 2.5L engines\u003c\/li\u003e\n\u003cli\u003eVW - Beetle 2011-2015 (MK2) 2.5L engines\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20199469285487,"sku":"IEBAVC2","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/integrated_engineering_boost_cap_fsi_vw_audi_2_3_1.1505856399.jpg?v=1569297873"},{"product_id":"ie-valve-cover-vw-audi-20t-fsi","title":"IE Billet Valve Cover for 2.0T FSI Engines","description":"\u003cp\u003eUpdate the look of your ugly stock plastic valve cover to a show-ready one piece machined billet aluminum IE valve cover on your 2.0T FSI (EA113) engine!\u003c\/p\u003e\n\u003ch2\u003ePRODUCT DETAILS\u003c\/h2\u003e\n\u003cp\u003eIE billet aluminum valve covers for the 2.0T FSI EA113 (timing belt driven) engines are a direct replacement for your factory valve cover for a clean updated look over the stock plastic valve cover. Designed as a perfect solution for a show-ready look or the base for your custom catch can project.\u003c\/p\u003e\n\u003ch2\u003eMACHINED DESIGN\u003c\/h2\u003e\n\u003cp\u003eMachined in-house from a solid block of aircraft grade aluminum for an attractive one piece design with a matching oil filler cap to finish off the look. The IE billet valve cover is machined to accept the factory valve cover gasket, so there is no worry of oil leaks.\u003c\/p\u003e\n\u003ch2\u003eFOR USE WITH CUSTOM CATCH CAN SETUPS ONLY\u003c\/h2\u003e\n\u003cp\u003eThis valve cover design completely removes the factory PCV breather setup and will require a custom catch can kit or breather setup. IE complete catch can kits for the billet valve cover are available separately for select models (located in required hardware tab). To make setting up a custom breather or catch can kit easy, this valve cover features a single -10an breather outlet providing a simple start for a variety of fittings or hose ends. The breather outlet is located above an integrated baffle system to reduce oil escaping the breather outlet. These baffles are hand welded into the valve cover, ensuring they will not fail or fall into the cylinder head.\u003c\/p\u003e\n\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces factory plastic valve cover\u003c\/li\u003e\n\u003cli\u003eUses factory valve cover gasket\u003c\/li\u003e\n\u003cli\u003eIn-house CNC machined from aluminum\u003c\/li\u003e\n\u003cli\u003eIncludes o ring sealed matching billet oil cap\u003c\/li\u003e\n\u003cli\u003e-10AN breather outlet for catch can setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eADDITIONAL PARTS REQUIRED\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEVAP CROSSOVER TUBE RELOCATION KIT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory plastic valve cover has an integrated evap line crossing through the center of the valve cover. The IE billet valve cover does not have this vacuum line running through the center, and requires The IE Evap Crossover Tube Relocation Kit. This kit includes everything needed to re-run the EVAP line hiding it away for a stealthy look. \u003cstrong\u003eIE Part Number: IEBAVC11\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eCATCH CAN KIT FOR BILLET VALVE COVER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe IE billet valve cover replaces the factory breather setup for a single -10AN breather outlet requiring you to run a custom catch can kit setup. IE has taken the leg work out of piecing together a catch can kit for transverse mounted 2.0T FSI engines commonly found in VW MK6 Golf R, MK5 GTI, Jetta, GLI and Audi MK2 TT, TTS, and A3 among others. This catch can kit includes everything you need to completely install the IE billet valve cover breather system. \u003cstrong\u003eIE Part Number: IEBACC3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi - A4 2005-2008 (B7) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 2005-2011 (C6) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - A6 Allroad 2005-2011 (C6) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - TT 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eAudi - TTS 2008-2015 (MK2 - 8J) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eAudi - A3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eAudi - S3 2006-2013 (MK2 - 8P) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eVW - GTI 2006-2009 (MK5) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eVW - Golf R 2012-2012 (MK6) 2.0T FSI (EA113) engines\u003c\/li\u003e\n\u003cli\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eVW - Passat 2006-2010 (B6) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003cli\u003eVW - EOS 2006-2015 (1F7) 2.0T FSI (EA113) engines*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*This billet valve cover will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1\/Gen2 TSI engine and is not compatible with billet valve covers.\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Raw Billet Aluminum","offer_id":20209782784111,"sku":"IEBAVC5-RW","price":479.49,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":39457760936075,"sku":"IEBAVC5-BK","price":582.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_9963_2.1505842724.jpg?v=1569298021"},{"product_id":"fluidampr-crank-pulley-vw-audi-18t-06a","title":"Fluidampr Crank Pulley for Late 1.8T Engines","description":"\u003ch2\u003eSTOP VIBRATIONS AT HIGH RPMS\u003c\/h2\u003e\n\u003cp\u003eA stock crank pulley is designed for a stock engine. When an engine is modified, the stock crank pulley does not do its job of keeping vibrations to a minimum. Fluidampr has a solution to that problem! Using a special design, these pullies will eliminate much of the vibration produced by your engine. That will keep your flywheel, trigger wheel, and timing gear on the crank even at high RPM usage!\u003cbr\u003e\u003cbr\u003eThe Fluidampr pullies have a precisely machined inertia ring inside along with special silicone fluid, that can absorb vibrations through all frequencies. The stock rubber dampened pulley uses rubber for dampening only for the frequency of the stock engine. These Fluidampr pullies are great for any engine setup you may have. They do not require any frequency tuning as a stock pulley would.\u003cbr\u003e\u003cbr\u003eYou will notice engine vibrations decrease, along with decreased clutch chatter if you have a lightweight flywheel.\u003cbr\u003e\u003cbr\u003eThese are a must for a modified engine, especially if you are revving higher than stock.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eVW - All transverse\/longitudinal 20V 1.8T 06A engines Audi - All transverse\/longitudinal 20V 1.8T 06A enginesWill not fit early 058 block engines\u003c\/p\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":20229196972143,"sku":"FD-551201","price":484.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/FD-551201.jpg?v=1569298505"},{"product_id":"fluidampr-crank-pulley-vw-audi-20t-fsi","title":"Fluidampr Crank Pulley for 2.0T FSI Engines","description":"\u003ch2\u003eSTOP VIBRATIONS AT HIGH RPMS\u003c\/h2\u003e\n\u003cp\u003eA stock crank pulley is designed for a stock engine. When an engine is modified, the stock crank pulley does not do its job of keeping vibrations to a minimum. Fluidampr has a solution to that problem! Using a special design, these pullies will eliminate much of the vibration produced by your engine. That will keep your flywheel, trigger wheel, and timing gear on the crank even at high RPM usage!\u003cbr\u003e\u003cbr\u003eThe Fluidampr pullies have a precisely machined inertia ring inside along with special silicone fluid, that can absorb vibrations through all frequencies. The stock rubber dampened pulley uses rubber for dampening only for the frequency of the stock engine. These Fluidampr pullies are great for use on stock and modified engine setups. They do not require any frequency tuning as a stock pulley would.\u003cbr\u003e\u003cbr\u003eYou will notice engine vibrations decrease, along with decreased clutch chatter if you have a lightweight flywheel or aftermarket clutch.\u003cbr\u003e\u003cbr\u003eThese are a must for a modified engine, especially if you are revving higher than stock.\u003cbr\u003e\u003cbr\u003eAlso, no need to worry about the pulley wearing out, as these are designed for lifetime use.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eVW - EA113 2.0T FSI engines (timing belt driven) Audi - EA113 FSI\/TFSI 2.0T engines (timing belt driven)\u003c\/p\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":20257818902639,"sku":"FD-551211","price":484.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/FD-551211.jpg?v=1569299211"},{"product_id":"fluidampr-crank-pulley-audi-27t","title":"FLUIDAMPR CRANK PULLEY FOR 2.7T 30V ENGINES","description":"\u003cp\u003eWhen increasing the power output and RPM of your 2.7T engine the stock crank pulley quickly loses its ability to keep harmful engine vibrations to a minimum. Upgrading to a performance Fluidampr crank pulley adapts and eliminates these vibrations, keeping your flywheel, trigger wheel, and timing gear on the crank and reduces engine internal wear. A must-have for any performance build!\u003c\/p\u003e\n\u003ch2\u003eProduct Features\u003c\/h2\u003e\n\u003cp\u003e• SFI 18.1 certified for professional motorsports\u003cbr\u003e\u003cbr\u003e• Vibration protection for the safe operation of engine internals\u003cbr\u003e\u003cbr\u003e• Smoother power delivery\u003cbr\u003e\u003cbr\u003e• Manufactured in the USA\u003cbr\u003e\u003cbr\u003e• Direct replacement, retains timing mark\u003cbr\u003e\u003cbr\u003e• Corrosion resistant black zinc chromate finish\u003c\/p\u003e\n\u003ch2\u003eSTOP VIBRATIONS AT HIGH RPMS\u003c\/h2\u003e\n\u003cp\u003eFluidampr performance dampers are engineered for superior, long-lasting crankshaft torsional vibration control. Improve long term optimum performance and durability by upgrading the stock elastomer style crank pulley to a Fluidampr performance damper during the early stages of engine modifications. The broad rpm range vibration protection and smooth power delivery. This Fluidampr performance damper allows for future engine upgrades, including common single disc clutch kits, without the need for a costly damper re-tune or replacement common with elastomer style harmonic dampers.\u003c\/p\u003e\n\u003ch2\u003eDIRECT FIT FOR AUDI 2.7T ENGINES\u003c\/h2\u003e\n\u003cp\u003eThe new Fluidampr performance damper for Audi 2.7T \u0026amp; 30V V6 engine applications is a direct replacement and includes timing mark. Constructed from high tensile strength steel, components are precision CNC machined and high-speed computer balanced during manufacturing. Made in the USA and finished with a corrosion resistant black zinc chromate finish and engraved timing mark.\u003c\/p\u003e\n\u003ch2\u003eVEHICLE FITMENT\u003c\/h2\u003e\n\u003cp\u003eAUDI - S4 1996-2001 (B5 - B5.5) V6 30V engines\u003cbr\u003eAUDI - RS4 1996-2001 (B5 - B5.5) V6 30V engines\u003cbr\u003eAUDI - A6 1998-2004 (C5) V6 30V engines\u003cbr\u003eAUDI - A6 Allroad 1998-2004 (C5) V6 30V engines\u003cbr\u003eAUDI - A4 1996-2001 (B5 - B5.5) V6 30V engines\u003cbr\u003eAUDI - A6 1998-2004 (C5) V6 30V engines\u003cbr\u003eAUDI - A6 Allroad 1998-2004 (C5) V6 30V engines\u003cbr\u003eAUDI - A8 1994-2002 (D2) V6 30V engines\u003cbr\u003eVW - Passat 1998-2005 (B5 - B5.5) V6 30V engines\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":20257863401583,"sku":"FD-651211","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/FD-651211.jpg?v=1569299213"},{"product_id":"gates-vw-audi-timing-belt-18t-06a","title":"Gates Racing 06A 1.8T Timing Belt","description":"\u003ch2\u003ePRODUCT DETAILS\u003c\/h2\u003e\n\u003cp\u003eThis is a Gates Racing Kevlar timing belt for the 06A late 1.8T engines. These belts are made from HNBR elastomeric composites, which make them 300% stronger than the OEM belts they replace. These belts also have three times the heat resistance of OEM belts. We recommend using these belts on high HP and high RPM engines.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eFits all LATE 06A 1.8T engines\u003c\/p\u003e","brand":"Gates","offers":[{"title":"Default Title","offer_id":20258544844911,"sku":"GR-T306RB","price":161.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/GR-T306RB.jpg?v=1569299231"},{"product_id":"ie-catch-can-vw-mk4-18t","title":"IE Catch Can Kit for MK4 1.8T Engines","description":"\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eKeep your engine running clean\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eHelps prevent carbon build-up\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eComplete kit, ready to install\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eInstalls under factory engine cover\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eAll components are black for a sleek stealth install\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eBraided stainless steel\/nylon hose\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS \u003c\/h2\u003e\n\u003cp\u003eA catch can works well to catch all of the oil fumes that are omitted from the block and valve cover breathers. This removes the oil mist and blow-by that is found in the charge piping and intake system while greatly helping to reduce carbon buildup, which relates to power loss and poor drivability. \u003cbr\u003e\u003cbr\u003eOur kit includes the breather adapters to plumb the catch can using the included -10AN hose. Our breather adapters replace the factory plastic breather connections that commonly crack or break on 1.8T engines. This complete kit removes the factory PCV components and plumbs the new catch can to the valve cover and block breather using the included billet breather adapters. This makes for an easy install that requires no custom fabrication or modifications. The catch can mounts in place of the factory relays, which get relocated into the wiring duct for a clean install.\u003cbr\u003e\u003cbr\u003eThis kit uses the Integrated Engineering vent-to-atmosphere catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the breather system. This flawless catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of the included T handle drain valve, no tools necessary. This beautiful piece is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay.\u003cbr\u003e\u003cbr\u003eEverything you need to upgrade the PCV system on your MK4 1.8T 20V engine is included with this kit, with a very simple installation that takes less than an hour to install on average. This kit allows the use of the factory engine cover if desired, and the entire install is completely reversible if it ever needs to be removed for any reason.\u003c\/p\u003e\n\u003ch2\u003eINCLUDED IN KIT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIE billet catch can\u003c\/li\u003e\n\u003cli\u003eIE block breather adapter\u003c\/li\u003e\n\u003cli\u003eIE valve cover breather\u003c\/li\u003e\n\u003cli\u003ePerfect-fit braided nylon hose\u003c\/li\u003e\n\u003cli\u003eAll necessary adapter fittings\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstall instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eINSTALLATION\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eEverything needed for installation of your new IE Catch Can Kit is included. The MK4 1.8T engine bay is tight and reliable mounting locations are limited. Modifying and relocation of the factory relay box is required and installation is recommended by a professional. \u003cstrong\u003e\u003ca title=\"IE MK4 Catch Can Kit Install Guide\" href=\"https:\/\/cdn.performancebyie.com\/guides\/IE-MK4-CATCH-CAN-IEBACA4-INSTALL-GUIDE.pdf\"\u003eView and download the full install guide here\u003c\/a\u003e.\u003c\/strong\u003e \u003c\/p\u003e\n\u003ch2\u003eCOLD WEATHER CLIMATES\u003c\/h2\u003e\n\u003cp\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eVW - GTI 1999-2005 (MK4) 1.8T 20V engines\u003cbr\u003eVW - Jetta \u0026amp; Jetta GLI 1999-2005 (MK4) 1.8T 20V engines\u003cbr\u003eVW - Golf 1999-2005 (MK4) 1.8T 20V engines\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20307322536047,"sku":"IEBACA4","price":473.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBACA4.1.jpg?v=1569301313"},{"product_id":"ie-catch-can-vw-audi-20t-tsi-oevc","title":"IE MK5 \u0026 MK6 Golf R 2.0T FSI Recirculating Catch Can Kit (For OEM Valve Cover)","description":"\u003ch2\u003ePRODUCT FEATURES \u003c\/h2\u003e\n\u003cp\u003e• Helps prevent carbon build-up\u003cbr\u003e• Keep your engine running clean\u003cbr\u003e• Complete kit, ready to install\u003cbr\u003e• Installs under the factory engine cover\u003cbr\u003e• All components are black for a sleek stealth install\u003cbr\u003e• Braided stainless steel\/nylon hose\u003cbr\u003e• \u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/IE_Catch_Can_Install_Guide_IEBACC1.pdf\" title=\"IE FSI Catch Can Install Guide\"\u003e\u003cstrong\u003eDOWNLOAD INSTALL GUIDE HERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS \u003c\/h2\u003e\n\u003cp\u003eA catch can is utilized to capture all of the oil fumes that are omitted from the valve cover breather, removing the faulty factory oil separator in the process. This not only removes the oil mist that is found everywhere but will greatly help reduce carbon buildup on the intake valves, a common problem on FSI engines, which relates to power loss and poor drivability. Our kit includes the necessary valve cover breather adapter to remove the separator and plumb the catch can using the two included -10AN hoses. Using our catch can kit, you are not required to remove any of the emissions systems or vent the catch can to the atmosphere, which can cause oil mist build-up in your engine bay. Our breather plate simply installs in place of the factory plastic breather plate located on top of the valve cover, while the catch can mounts to a custom bracket easily accessible on the passenger side of the vehicle.\u003cbr\u003e\u003cbr\u003eThis kit uses the Integrated Engineering billet recirculating catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the turbo inlet. This flawless catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of the included T handle drain valve, no tools necessary. This beautiful piece is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay.\u003cbr\u003e\u003cbr\u003eEverything you need to upgrade the PCV system on your MK5 and MK6 Golf R 2.0T FSI engine is included with this kit, with a very simple installation that takes less than an hour to install on average. This kit allows the use of the factory engine cover if desired, and the entire install is completely reversible if it ever needs to be removed for any reason.\u003c\/p\u003e\n\u003ch2\u003eINCLUDED WITH KIT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet recirculating catch can\u003c\/li\u003e\n\u003cli\u003eValve cover breather adapter\u003c\/li\u003e\n\u003cli\u003eBillet boost cap\u003c\/li\u003e\n\u003cli\u003ePerfect-fit braided Nylon hoses\u003c\/li\u003e\n\u003cli\u003eAll necessary adapter fittings\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFITMENT NOTES\u003c\/h2\u003e\n\u003cp\u003eREQUIRES FACTORY STYLE ENGINE MOUNTS\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis IE catch can kit uses a secure mount on the OE engine mount bracket to secure the catch can. Many aftermarket motor mounts delete this mounting location and will require you to custom mount the catch can itself. If you are running aftermarket motor mounts, please verify if you have the mounting provision before purchasing.\u003c\/p\u003e\n\u003ch2\u003eCOLD WEATHER CLIMATES \u003c\/h2\u003e\n\u003cp\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/p\u003e\n\u003ch2\u003eFITMENT \u003c\/h2\u003e\n\u003cp\u003eAudi - TT 2008-2015 (MK2 - 8J) Early 2.0T FSI EA113 (Timing belt engine) only\u003cbr\u003eAudi - TTS 2008-2015 (MK2 - 8J) 2.0T \u003cbr\u003eAudi - A3 2006-2013 (MK2 - 8P) Early 2.0T FSI EA113 (Timing belt engine) only\u003cbr\u003eAudi - S3 2006-2013 (MK2 - 8P) 2.0T\u003cbr\u003eVW - GTI 2006-2009 (MK5) Early 2.0T FSI EA113 (Timing belt engine) only\u003cbr\u003eVW - Golf R 2012-2012 (MK6) 2.0T\u003cbr\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5) Early 2.0T FSI EA113 (Timing belt engine) only\u003cbr\u003eVW - Passat 2006-2010 (B6) Early 2.0T FSI EA113 (Timing belt engine) only\u003cbr\u003eVW - EOS 2006-2015 (1F7) Early 2.0T FSI EA113 (Timing belt engine) only\u003cbr\u003e*This catch can kit will only work on early model 2.0T EA113 engines. You can verify your the correct engine if it is in the above chassis and is driven by a timing belt. If your engine is driven by a timing chain, you have an EA888 Gen1\/Gen2 TSI engine and requires our IEBACC2 catch can kit.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rCw2l76b0YA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20307352649839,"sku":"IEBACC1","price":532.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBACC1.1.jpg?v=1569301315"},{"product_id":"ie-catch-can-vw-audi-20t-tsi","title":"IE MK5 \u0026 MK6 2.0T TSI Recirculating Catch Can Kit","description":"\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cp\u003e• Helps prevent carbon build-up\u003cbr\u003e• Keep your engine running clean\u003cbr\u003e• Complete kit, ready to install\u003cbr\u003e• Installs under the factory engine cover\u003cbr\u003e• All components are black for a sleek stealth install\u003cbr\u003e• Braided stainless steel\/nylon hose\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS \u003c\/h2\u003e\n\u003cp\u003eA catch can works well to catch all of the oil fumes that are omitted from the valve cover breather, removing the faulty factory oil separator in the process. This not only removes the oil mist that is found everywhere but will greatly help reduce carbon buildup on the intake valves, a common problem on TSI engines, which relates to power loss and poor drivability. Our kit includes the necessary valve cover breather adapter to remove the separator and plumb the catch can using the two included -10AN hoses. Using our catch can kit, you are not required to remove any of the emissions system or vent the catch can to the atmosphere, which can cause oil mist build-up in your engine bay. Our breather plate simply installs in place of the factory plastic breather plate located on top of the valve cover, while the catch can mounts to a custom bracket easily accessible on the passenger side of the vehicle.\u003cbr\u003e\u003cbr\u003eThis kit uses the Integrated Engineering billet recirculating catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the turbo inlet. This flawless catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of the included T handle drain valve, no tools necessary. This beautiful piece is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay.\u003cbr\u003e\u003cbr\u003eEverything you need to upgrade the PCV system on your MK5\/MK6 2.0T TSI engine is included with this kit, with a very simple installation that takes less than an hour to install on average. This kit allows the use of the factory engine cover if desired, and the entire install is completely reversible if it ever needs to be removed for any reason.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/IEBACC2-INSTALL%20GUIDE.pdf\" title=\"IE VW MK6 TSI Catch Can Install Guide\"\u003e\u003cstrong\u003eCLICK HERE TO DOWNLOAD INSTALL GUIDE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eINCLUDED WITH KIT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet recirculating catch can\u003c\/li\u003e\n\u003cli\u003eValve cover breather adapter\u003c\/li\u003e\n\u003cli\u003eBillet boost cap\u003c\/li\u003e\n\u003cli\u003ePerfect-fit braided nylon hoses\u003c\/li\u003e\n\u003cli\u003eAll necessary adapter fittings\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFITMENT NOTES\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eREQUIRES FACTORY STYLE ENGINE MOUNTS.\u003c\/strong\u003e\u003cbr\u003eThis IE catch can kit uses a secure mount on the OE engine mount bracket to secure the catch can. Many aftermarket motor mounts delete this mounting location and will require you to custom mount the catch can itself. If you are running aftermarket motor mounts, please verify if you have the mounting provision before purchasing.\u003c\/p\u003e\n\u003ch2\u003eCOLD WEATHER CLIMATES \u003c\/h2\u003e\n\u003cp\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/p\u003e\n\u003ch2\u003eFITMENT \u003c\/h2\u003e\n\u003cp\u003eAUDI - MK2 A3 2.0T TSI (EA888 GEN 1\/2 ONLY)*\u003cbr\u003eAUDI - MK2 TT 2.0T TSI (EA888 GEN 1\/2 ONLY)*\u003cbr\u003eVW - MK5 GTI 2.0T TSI (EA888 GEN 1\/2 ONLY)*\u003cbr\u003eVW - MK6 GTI 2.0T TSI (EA888 GEN 1\/2 ONLY)*\u003cbr\u003eVW - MK6 JETTA \u0026amp; GLI 2.0T TSI (EA888 GEN 1\/2 ONLY)*\u003cbr\u003eVW - PASSAT B6 2.0T TSI (EA888 GEN 1\/2 ONLY)*\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e*This catch can kit will only work on late model 2.0T EA888 Generation 1 \u0026amp; 2 engines. You can verify yours is the correct engine if it is in the above chassis and is driven by a timing chain. If your engine is driven by a timing belt, you have an EA113 FSI engine and requires our IEBACC1 catch can kit.\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20307382501487,"sku":"IEBACC2-BK","price":591.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBACC2.1.jpg?v=1569301318"},{"product_id":"ie-billet-valve-cover-catch-can-kit-vw-audi-20t-fsi","title":"IE 2.0T FSI Catch Can Kit For IE Billet Valve Cover | Fits MK5, MK6 Golf R, Mk2 TTS","description":"\u003ch2\u003ePRODUCT FEATURES \u003c\/h2\u003e\n\u003cp\u003e• Easy install catch can and valve cover kit\u003cbr\u003e• Complete kit, ready to install\u003cbr\u003e• Installs with IE billet valve cover (sold separately)\u003cbr\u003e• All components are black for a sleek stealth install\u003cbr\u003e• Braided stainless steel\/nylon hose\u003cbr\u003e• \u003ca title=\"IE FSI VALVE COVER CATCH CAN KIT INSTALL TEMPLATE\" href=\"https:\/\/cdn.performancebyie.com\/guides\/IEBACC3-INSTALL%20GUIDE.pdf\"\u003e\u003cstrong\u003eDOWNLOAD INSTALL GUIDE HERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL INFORMATION \u003c\/h2\u003e\n\u003cp\u003eTo prevent crankcase oil fumes from condensing and filling your turbo piping, intercooler, and intake manifold, a catch can is a must for your 2.0T FSI engine. A catch can works well to catch all of the oil fumes that are omitted from the valve cover breather, removing the faulty factory oil separator in the process. This not only removes the oil mist found everywhere but will greatly help reduce carbon buildup on the intake valves, a common problem on FSI engines related to power loss and poor drivability. This kit includes all necessary fittings and hoses to plumb the system with the IE billet valve cover. This kit connects to the block breather adapter and valve cover, then is connected to the catch can inlet, which recirculates clean air pressure back to the turbo inlet. With the catch can be recirculated to the turbo inlet, there is no oil mist or mess in the engine bay, as commonly seen with a vent-to-atmosphere style catch can setup.\u003cbr\u003e\u003cbr\u003eThis kit uses the Integrated Engineering billet recirculating catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the turbo inlet. This flawless catch can is fully serviceable and easily disassembled if needed. Draining the catch can is simple with the included T-handle drain valve. No tools are necessary. This beautiful piece has a bright black anodized finish, maintaining a stealthy appearance while looking great in your engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis recirculating catch can kit has been designed for use with the IE billet valve cover (IE part number: IEBAVC5) as a simple install solution for your billet valve cover and catch can. IE billet valve cover sold separately. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eINCLUDED IN KIT\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet recirculating catch can\u003c\/li\u003e\n\u003cli\u003eRear breather adapter\u003c\/li\u003e\n\u003cli\u003eBillet boost cap\u003c\/li\u003e\n\u003cli\u003ePerfect-fit braided nylon hoses\u003c\/li\u003e\n\u003cli\u003eAll necessary adapter fittings\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFITMENT NOTES \u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eREQUIRES IE BILLET VALVE COVER\u003c\/strong\u003e\u003cbr\u003eThis kit is designed to be used with IE billet valve cover only, which is sold separately. Does not work with the OEM valve cover. This kit includes the adapter fitting to recirculate the OEM turbo. If using a big turbo setup, a -10AN bung will be needed on the turbo inlet to recirculate the catch can.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eREQUIRES FACTORY STYLE ENGINE MOUNTS\u003c\/strong\u003e\u003cbr\u003eThis IE catch can kit uses a secure mount on the OE engine mount bracket to secure the catch can. Many aftermarket motor mounts delete this mounting location and will require you to custom-mount the catch can itself. If you are running aftermarket motor mounts, please verify if you have the mounting provision before purchasing.\u003c\/p\u003e\n\u003ch2\u003eCOLD WEATHER CLIMATES \u003c\/h2\u003e\n\u003cp\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eVW Golf R MK6 (2012-2013) 2.0T FSI (EA113) engines\u003cbr\u003eVW GTI MK5 (2006-2009) with 2.0T FSI (EA113) engines only\u003cbr\u003eAudi A3 8P\/MK2 (2006-2013) with 2.0T FSI (EA113) engines only \u003cbr\u003eAudi S3 8P\/MK2 (2006-2013) 2.0T FSI (EA113) engines\u003cbr\u003eAudi TT 8J\/MK2 (2008-2015) with 2.0T FSI (EA113) engines only\u003cbr\u003eAudi TTS 8J\/MK2 (2008-2015) 2.0T FSI (EA113) engines\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL HARDWARE \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIE Billet Valve Cover for 2.0T FSI Engines - IE Part Number IEBAVC5\u003c\/li\u003e\n\u003cli\u003eIE EVAP Crossover Tube Relocation Kit - IE Part Number IEBAVC11\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20307440009327,"sku":"IEBACC3","price":622.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBACC3.1.jpg?v=1569301319"},{"product_id":"ie-catch-can-kit-audi-a4-b8","title":"IE B8 A4 2.0T TSI Recirculating Catch Can Kit","description":"\u003ch2\u003ePRODUCT FEATURES \u003c\/h2\u003e\n\u003cp\u003e• Helps prevent carbon build-up\u003cbr\u003e• Keep your engine running clean\u003cbr\u003e• Complete kit, ready to install\u003cbr\u003e• Installs under the factory engine cover\u003cbr\u003e• All components are black for a sleek stealth install\u003cbr\u003e• Braided stainless steel\/nylon hose\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003ePrevent crankcase oil fumes from condensing and filling your turbo piping, intercooler, and intake manifold. The simple to install and quality looking IE catch can kit is a must for your VW MK5 \u0026amp; MK6 2.0T TSI engine.\u003c\/p\u003e\n\u003cp\u003eA catch can works well to catch all of the oil fumes that are omitted from the valve cover breather, removing the faulty factory oil separator in the process. This not only removes the oil mist that is found everywhere but will greatly help reduce carbon buildup on the intake valves, a common problem on TSI engines, which relates to power loss and poor drivability.\u003cbr\u003e\u003cbr\u003eOur kit includes the necessary valve cover breather adapter to remove the separator and plumb the catch can using the two included -10AN hoses. Using our catch can kit, you are not required to remove any of the emissions system or vent the catch can to the atmosphere, which can cause oil mist build-up in your engine bay. Our breather plate simply installs in place of the factory plastic breather plate located on top of the valve cover, while the catch can mounts to a custom bracket easily accessible on the passenger side of the vehicle.\u003cbr\u003e\u003cbr\u003eThis kit uses the Integrated Engineering billet recirculating catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the turbo inlet. This flawless catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of the included T handle drain valve, no tools necessary. This beautiful piece is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay.\u003cbr\u003e\u003cbr\u003eEverything you need to upgrade the PCV system on your Audi B8 2.0T TSI engine is included with this kit, with a very simple installation that takes less than an hour to install on average. This kit allows the use of the factory engine cover if desired, and the entire install is completely reversible if it ever needs to be removed for any reason.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/IE%20Catch%20Can%20Install%20Guide%20B8%20TSI_IEBACG1.pdf\" title=\"IE Audi B8 TSI Catch Can Install Guide\"\u003e\u003cstrong\u003eCLICK HERE TO DOWNLOAD INSTALL GUIDE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eCOLD WEATHER CLIMATES\u003c\/h2\u003e\n\u003cp\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eAUDI - A4 B8 \u0026amp; B8.5 2.0T TFSI*\u003cbr\u003eAUDI - A4 ALLROAD B8 \u0026amp; B8.5 2.0T TFSI*\u003cbr\u003eAUDI - A5 B8 \u0026amp; B8.5 2.0T TFSI*\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e*Does not fit Flexfuel 5th injector vehicles with metal intake manifold. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20307512950895,"sku":"IEBACG1-BK","price":591.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBACG1-BK.1.jpg?v=1569301321"},{"product_id":"ie-catch-can-kit-vw-mk7-gti","title":"IE Recirculating Catch Can Kit For MK7 GTI","description":"\u003ch2\u003ePRODUCT FEATURES \u003c\/h2\u003e\n\u003cdiv\u003e• Complete kit, ready to install\u003c\/div\u003e\n\u003cdiv\u003e• Keep oil blow-by out of turbocharger and intake system\u003c\/div\u003e\n\u003cdiv\u003e• Reduces power-robbing carbon build-up\u003c\/div\u003e\n\u003cdiv\u003e• All components are black for a sleek stealth install\u003c\/div\u003e\n\u003cdiv\u003e• Braided stainless steel\/nylon hoses\u003c\/div\u003e\n\u003cdiv\u003e• Easy maintenance and no tools required to drain\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/IEBACN1%20MQB%20Catch%20Can%20Kit%20Install%20Guide.pdf\" title=\"IE MK7 GTI Catch Can Kit Install Guide\"\u003e\u003cstrong\u003e• Download Easy Install Guide \u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eTo prevent crankcase oil fumes from condensing and filling your turbo piping, intercooler, and intake manifold, a catch can is a must for your new MK7 EA888 GEN 3 TSI engine. A catch can works well to gather all of the oil fumes that are omitted from the valve cover breather, removing the faulty factory oil separator in the process. This not only removes the oil mist that is found everywhere but will greatly help reduce carbon buildup on the intake valves, a common problem on TSI engines, which relates to power loss and poor drivability. Our kit includes the necessary valve cover breather adapter to remove the separator and plumb the catch can using the two included -10AN hoses. Using our catch can kit, you are not required to remove any of the emissions systems or vent the catch can to the atmosphere, which can cause oil mist build-up in your engine bay. Our breather plate simply installs in place of the factory plastic breather plate located on top of the valve cover, while the catch can mounts to a custom bracket easily accessible on the passenger side of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIn order to keep the factory breather system fully functional, we have designed a billet breather plate with a complex baffle system, which works effectively to keep oil out of the lines, while still allowing the crankcase to breathe through the catch can. This plate directly replaces the PCV valve on the top side of the valve cover, with all necessary provisions for the OEM hoses that connect to it.\u003cbr\u003e\u003cbr\u003eThis kit uses the Integrated Engineering billet recirculating catch can, which features our state-of-the-art baffle system to catch the oil mist and not let it pass back into the turbo inlet. This flawless catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of the included T handle drain valve- simply unbolt the single bolt holding the can and open the valve to drain the liquid out. This beautiful piece is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay.\u003c\/p\u003e\n\u003ch2\u003eINCLUDED WITH KIT\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eEverything you need to upgrade the PCV system on your EA888 GEN 3 engine is included with this kit, with a very simple installation that takes less than an hour to install on average. This kit allows the use of the factory engine cover if desired, and the entire install is completely reversible if it ever needs to be removed for any reason.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBillet recirculating catch can\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eValve cover breather adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerfect-fit braided Nylon hoses\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll necessary adapter fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAll necessary mounting hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eFITMENT NOTES\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eREQUIRES FACTORY STYLE ENGINE MOUNTS\u003c\/strong\u003e\u003cbr\u003eThis IE catch can kit uses a secure mount on the OE engine mount bracket to secure the catch can. Many aftermarket motor mounts delete this mounting location and will require you to custom mount the catch can itself. If you are running aftermarket motor mounts, please verify if you have the mounting provision before purchasing.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCOLD WEATHER CLIMATES \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking the contents of the catch can frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFITMENT\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAudi - A3 2015+ (8V - MQB) 1.8T \u0026amp; 2.0T TSI engines\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - GTI 2015+ (MK7) 2.0T TSI engine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - Golf 2015+ (MK7) 1.8T TSI Engine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - Jetta \u0026amp; GLI 2013+ 1.8T \u0026amp; 2.0T TSI engines (EA888 Gen 3 only)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVW - Golf SportWagen 2015+ (MK7) 1.8T TSI engine\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20307631341679,"sku":"IEBACN1","price":650.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBACN1.1.jpg?v=1569301323"},{"product_id":"ie-breather-adapters-vw-audi-18t-20v","title":"IE -10AN Block \u0026 Valve Cover Breather Adapter Kit For 1.8T 20V Engines","description":"\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cp\u003e• Convert your breathers to AN hose ends and lines\u003cbr\u003e• Perfect for your custom catch can project\u003cbr\u003e• Fast and easy installation designs\u003cbr\u003e• Converts factory block breather to -10AN fitting\u003cbr\u003e• Converts factory valve cover breather to -10AN fitting\u003cbr\u003e• In-house CNC machined from 6061 aluminum\u003c\/p\u003e\n\u003ch2\u003eCONVERT YOUR BREATHERS TO -10AN\u003c\/h2\u003e\n\u003cp\u003eiE's -10AN Block Breather Adapter is a quick and simple solution to add threaded outlet fittings to your stock block breather and valve cover breather on the 1.8T 20V 06A engines. A perfect solution for custom breather systems or catch can setups. This kit includes both IE in-house CNC machined breather fittings needed to start your custom AN line catch can project at a bundled discount price. The block breather fitting installs in place of the factory plastic hose on your stock oil cooler housing. The valve cover breather press-fit fitting installs in place of the factory hose barb in your stock valve cover.\u003c\/p\u003e\n\u003ch2\u003eEASY INSTALLATION\u003c\/h2\u003e\n\u003cp\u003eThis fitting kit provides you with two -10AN threaded outlets for use with standard AN hose ends or fittings of your choice. Installation takes less than 10 minutes with no welding, drilling, or modification required. Simply remove the factory hose and replace it with your new IE breather adapter re-using the o ring and securing clip. The valve cover fitting simply installs by first removing the factory hose barb with pliers, then heat and tap your IE breather adapter in with a rubber mallet.\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eAudi - TT 2000-2006 (MK1 - 8N) 1.8T 20V 06A engines\u003cbr\u003eAudi - A3 1996-2003 (MK1 - 8L) 1.8T 20V 06A engines\u003cbr\u003eAudi - S3 1996-2003 (MK1 - 8L) 1.8T 20V 06A engines\u003cbr\u003eAudi - A4 1996-2001 (B5 - B5.5) 1.8T 20V 06A engines\u003cbr\u003eAudi - A4 2002-2005 (B6) 1.8T 20V 06A engines\u003cbr\u003eAudi - A6 1998-2004 (C5) 1.8T 20V 06A engines\u003cbr\u003eAudi - A6 Allroad 1998-2004 (C5) 1.8T 20V 06A engines\u003cbr\u003eVW - Golf 1999-2005 (MK4) 1.8T 20V 06A engines\u003cbr\u003eVW - GTI 1999-2005 (MK4) 1.8T 20V 06A engines\u003cbr\u003eVW - Jetta \u0026amp; Jetta GLI 1999-2005 (MK4) 1.8T 20V 06A engines\u003cbr\u003eVW - Passat 1998-2005 (B5 - B5.5) 1.8T 20V 06A engines\u003cbr\u003eVW - Beetle 1998-2011 (1C - 9C - 1Y) 1.8T 20V 06A engines\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20327219101807,"sku":"IEBAVA15","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBAVA15.1.jpg?v=1569301801"},{"product_id":"ie-billet-valve-cover-vw-25l","title":"IE 2.5L 5CYL Billet Valve Cover","description":"\u003ch2\u003ePRODUCT FEATURES\u003c\/h2\u003e\n\u003cp\u003e• Made in house from 6061 aircraft aluminum \u003cbr\u003e• Attractive one-piece CNC machined design \u003cbr\u003e• Converts breather to -10an for an easy catch can setup \u003cbr\u003e• Easy OEM-like install uses factory gasket\u003cbr\u003e• Baffled breather outlet keeps oil inside the head\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL FEATURES\u003c\/h2\u003e\n\u003cp\u003eThese beautifully finished pieces start off as one large piece of 6061 aircraft aluminum and are precisely machined on our in-house CNC mill. They are a direct replacement for your factory valve cover and use the OEM gasket. They have a single -10an outlet for a custom breather setup. To ensure that no oil comes out of the breather, these have welded baffles that are guaranteed to not fail. Whether you are looking for a custom look, or an easy way to start off a custom catch can project, these billet 2.5L valve covers are a great addition to your engine bay!\u003c\/p\u003e\n\u003ch2\u003eFITMENT\u003c\/h2\u003e\n\u003cp\u003eVW - Golf 2010-2014 (MK6)\u003cbr\u003eVW - Rabbit 2006-2009 (MK5)\u003cbr\u003eVW - Jetta \u0026amp; Jetta GLI 2006-2010 (MK5)\u003cbr\u003eVW - Jetta \u0026amp; Jetta GLI 2010-2014 (MK6)\u003cbr\u003eVW - Jetta SportWagen 2011-2014 (MK6)\u003cbr\u003eVW - Beetle 1998-2011 (1C - 9C - 1Y)\u003cbr\u003eVW - Beetle 2011-2015 (MK2)\u003c\/p\u003e\n\u003ch2\u003eADDITIONAL HARDWARE\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2.5L 5 CYLINDER VALVE COVER GASKET - 07K 103 483 B*\u003c\/li\u003e\n\u003cli\u003eIE BOOST CAP FOR 2.5L 5CYL ENGINES - IEBAVC2*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cem\u003e*It is recommended to replace the valve cover gasket whenever you remove the valve cover\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e*When installing an IE billet valve cover, a boost cap is required to block off the factory PCV outlet\u003c\/em\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":20327345815663,"sku":"IEBAVB3","price":561.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/IEBAVB3.1.jpg?v=1569301803"},{"product_id":"ie-catch-can-vta","title":"IE Vent To Atmosphere Catch Can | DIY Universal Fitment","description":"\u003ch2\u003eKEEP YOUR ENGINE CLEAN\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis IE Catch Can is the perfect base for setting up your own vent to atmosphere (VTA) catch can system to prevent crankcase oil fumes from condensing and filling your intake piping, turbo piping, intercooler, intake manifold, and breather system. IE's state of the art Vent To Atmosphere Catch Can is a must for easy performance engine maintenance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLEADING FEATURES\u003cbr\u003e \u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eKeeps your engine running clean\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBaffle system catches all oil blow-by\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompletely universal for any engine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHelps prevent carbon build-up\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh flow 1\/2\" NPT thread inlets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack anodize for a sleek stealth install\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIn-house CNC machined aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy bottom mount drain plug\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eBENEFITS OF A CATCH CAN\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAn IE catch can is a must for anyone looking to prevent crankcase oil blow-by and fumes from condensing and filling your turbo piping, intercooler, and intake manifold. The IE vent-to-atmosphere billet catch can is designed to catch all of the oil fumes and gunk omitted from the factory engine breather systems. This not only removes the blow-by oil and build-up, but will greatly help reduce oil buildup in the intake system, valves, combustion chamber, vacuum system, and PCV hoses which relate to power loss and poor drivability.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eIE VENT TO ATMOSPHERE CATCH CAN DESIGN\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Integrated Engineering billet VTA catch can feature our state-of-the-art baffle system. This baffle allows crankcase pressure to flow through the catch can while oil is separated and stays behind. This design separates more oil than the traditional catch can designs and keeps the liquid in the chamber and out of your engine bay. This sleek catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of a bottom mounted drain plug (no-tool t handle drain sold separately). Included with our catch cans, high-quality IE breather filters will further help to keep large particles from exiting the can, as well as any outside elements flowing back to the PCV system. This beautiful can is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCUSTOM INSTALL REQUIRED\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eIE catch cans are a universal design and can be adapted to any vehicle with the use of readily available adapters and fittings. The included choice of 90 degree or straight mounting bracket makes installing the can into any engine bay easy. Our catch cans feature two 1\/2\" NPT thread breather inlets to accept a wide variety of fittings, adapters, or hose ends to custom install into your factory breather system. IE also produces direct-fit catch can kits for many VW and Audi engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOPTIONAL MOUNT BRACKETS\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTo make your custom install as easy as possible, you have your choice of either a straight or 90-degree bracket. These stainless steel brackets are a direct-fit to the IE catch can, strong enough to keep it stable in any condition and help to make fabricating or finding your mount location as easy as possible. Add your choice of bracket style to your order above. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCOLD WEATHER CLIMATES\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking catch can content frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39471168225419,"sku":"IEDIYUU18","price":186.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_7544_2.1505843908.jpg?v=1569303498"},{"product_id":"ie-recirculating-catch-can","title":"IE Recirculating Catch Can | DIY Universal Fitment","description":"\u003ch2\u003eKEEP YOUR ENGINE CLEAN \u0026amp; SEALED\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis IE Catch Can is the perfect base for setting up your own recirculating catch can system to prevent crankcase oil fumes from condensing and filling your intake piping, turbo piping, intercooler, intake manifold, and breather system without adding any smelly fumes or messy oil film to your engine bay. IE's state of the art Recirculating Catch Can is a must for easy maintenance of your performance engine.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eLEADING FEATURES\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompletely universal for any engine\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBaffle system catches all oil blow-by\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eO-ring sealed for odorless operation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eChoice of straight or 90-degree mounting bracket\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecirculating can keeps all OE systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh flow 1\/2\" NPT inlet\/outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo welds make for a fully serviceable can\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy bottom mount drain plug\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack anodized sleek and stealthy finish\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eBENEFITS OF A CATCH CAN\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eAn IE catch can is a must for anyone looking to prevent crankcase oil blow-by and fumes from condensing and filling your turbo piping, intercooler, and intake manifold. The IE recirculated catch can is designed to catch all of the oil fumes and gunk omitted from the factory engine breather systems. This not only removes the blow-by oil and build-up, but will greatly help reduce oil buildup in the intake system, valves, combustion chamber, vacuum system, and PCV hoses which relate to power loss and poor drivability.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eIE RECIRCULATING CATCH CAN DESIGN\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Integrated Engineering billet recirculating catch can feature our state-of-the-art baffle system. This baffle allows crankcase pressure to flow through the catch can while oil is separated and stays behind. This design separates more oil than the traditional catch can designs and keeps the liquid in the chamber and out of your engine intake and breather system. This sleek catch can is fully serviceable, easily disassembling if needed. Draining the catch can is simple with the use of a bottom mounted drain plug (no-tool t handle drain sold separately). Using our recirculating catch can, you are not required to remove any of the emissions systems or vent the catch can to the atmosphere, which can cause oil mist build-up in your engine bay. It simply installs into your factory breather system after the breather ports and before a recirculation port that goes back to the inlet. This beautiful can is finished with a bright black anodize finish, which maintains a stealthy appearance while looking great in your engine bay. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCUSTOM INSTALL REQUIRED\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eIE catch cans are a universal design and can be adapted to any vehicle with the use of readily available adapters and fittings. The included choice of 90 degree or straight mounting bracket makes installing the can into any engine bay easy. Our catch cans feature 1\/2\" NPT thread breather inlet and outlet to accept a wide variety of fittings, adapters, or hose ends to custom install into your factory breather system. IE also produces direct-fit catch can kits for many VW and Audi engines.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eOPTIONAL MOUNT BRACKETS\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTo make your custom install as easy as possible, you have your choice of either a straight or 90-degree bracket. These stainless steel brackets are a direct-fit to the IE Surge tank, strong enough to keep it stable in any condition and help to make fabricating or finding your mount location as easy as possible. Add your choice of bracket style to your order above. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCOLD WEATHER CLIMATES\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eCatch can kits are designed for warm weather climates only. If you live in an area with sub-freezing temperatures in winter months, extra precaution must be taken as condensation in the catch can and lines can freeze and cause pressure to build up in the crankcase. We recommend checking catch can content frequently or removing the system entirely during cold winter months. Integrated Engineering is not responsible for any damage caused by improper servicing of the catch can.\u003c\/span\u003e\u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":39471168159883,"sku":"IEDIYUU17","price":186.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/products\/img_7098_1_1_2.1505843071.jpg?v=1569303498"},{"product_id":"ie-aluminum-rear-wiper-delete-for-vw-hatchbacks","title":"iE Aluminum Rear Wiper Delete For Audi \u0026 VW Hatchbacks","description":"\u003cp\u003eIs that clunky rear wiper ruining your Euro hatchback's sleek, simple lines? Building a track car? Live where it never rains? Or maybe you just want to save money on wiper blades? \u003ci\u003e\u003cstrong\u003eYou don't need that rear wiper, delete it!\u003c\/strong\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eThe iE Aluminum Rear Wiper Delete Plug is the ultimate finishing touch for a clean and streamlined look. Our clever two-piece design creates a waterproof seal with double o-rings without messy silicone or RTV. Machined from billet aluminum and finished with a subtle iE logo, it’s an easy way to upgrade the look of your build and give your rear window the style it deserves. \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFEATURES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSleek and simple style\u003c\/strong\u003e -Goodbye bulky wiper blade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting\u003c\/strong\u003e -Durable black anodized aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeak-free\u003c\/strong\u003e -Double o ring seals keep your interior dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy installation\u003c\/strong\u003e -Bolts together with one tool\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWHAT'S INCLUDED:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminum front cap\u003c\/li\u003e\n\u003cli\u003eBillet aluminum back cap\u003c\/li\u003e\n\u003cli\u003eTwo o-ring seals\u003c\/li\u003e\n\u003cli\u003eStainless Allen bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cbr\u003e\u003cem\u003eDOWNLOAD THE \u003ca rel=\"noopener\" title=\"Download install guide\" href=\"https:\/\/cdn.performancebyie.com\/guides\/iE%20BIllet%20Rear%20Wiper%20Delete%20Install%20Guide_IEGAUU2.pdf\" target=\"_blank\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003c\/em\u003e\u003cbr\u003e \u003c\/h3\u003e\n\u003ch2\u003eWHAT'S IT FIT:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi 8P A3\u003c\/li\u003e\n\u003cli\u003eAudi C8 RS6\u003c\/li\u003e\n\u003cli\u003eAudi 4M SQ7\u003c\/li\u003e\n\u003cli\u003eAudi 4M Q7\u003c\/li\u003e\n\u003cli\u003eAudi 4M Q8\u003c\/li\u003e\n\u003cli\u003eAudi 4M RS Q8\u003c\/li\u003e\n\u003cli\u003eAudi 8U Q3\u003c\/li\u003e\n\u003cli\u003eAudi F3 Q3\u003c\/li\u003e\n\u003cli\u003eAudi B9 Q5\u003c\/li\u003e\n\u003cli\u003eAudi B9 SQ5\u003c\/li\u003e\n\u003cli\u003eAudi B8 Allroad\u003c\/li\u003e\n\u003cli\u003eAudi B8 SQ5\u003c\/li\u003e\n\u003cli\u003eAudi B8 Q5\u003c\/li\u003e\n\u003cli\u003eVW MK8 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK8 Golf R\u003c\/li\u003e\n\u003cli\u003eVW MK7 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK7 Golf R\u003c\/li\u003e\n\u003cli\u003eVW MK7 Golf \/ Alltrak\u003c\/li\u003e\n\u003cli\u003eVW Gen 1\/2 Tiguan\u003c\/li\u003e\n\u003cli\u003eVW Atlas Crosspsort\u003c\/li\u003e\n\u003cli\u003eVW MK6 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK6 Golf R\u003c\/li\u003e\n\u003cli\u003eVW MK6 Golf\u003c\/li\u003e\n\u003cli\u003eVW MK5 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK5 R32\u003c\/li\u003e\n\u003cli\u003eVW MK5 Rabbit\u003c\/li\u003e\n\u003cli\u003eVW MK4 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK4 R32\u003c\/li\u003e\n\u003cli\u003eVW MK4 Golf\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":42942514102411,"sku":"IEGAUU2","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/files\/IEGAUU2_01.jpg?v=1733965567"},{"product_id":"ie-aluminum-washer-fluid-cap-for-audi-vw","title":"iE Aluminum Washer Fluid Cap For Audi \u0026 VW","description":"\u003ch2\u003eYOUR ENGINE BAY DESERVES BETTER\u003c\/h2\u003e\n\u003cp\u003eYou’ve built your ultimate dream Audi or VW. It pulls hard, hugs curves, sounds fierce, and looks incredible. Well… almost. That bright blue washer fluid cap? Total eyesore. That cheap plastic belongs on a milk bottle, not in your high-end German engine bay. Spill oil or wipe grime on it, and it’s game over with permanent stains. \u003cem\u003e\u003cstrong\u003eTime for an upgrade.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eIT'S ALL IN THE DETAILS\u003c\/h2\u003e\n\u003cp\u003eYour washer reservoir deserves better; meet the iE Aluminum Washer Cap. Crafted from CNC-machined billet aluminum, it has precision threads for a satisfying twist and an o-ring seal to keep spills at bay. This is not another uninspired aluminum version of the stock cap; we went all in with bold edges, sharp angles, and a sleek black anodized finish complete with a subtle iE logo. Think of it as a bodybuilder in a tux—strong, sharp, and effortlessly classy.\u003cbr\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFEATURES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead-turning design\u003c\/strong\u003e -Bold edges, sleek black finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last\u003c\/strong\u003e -Durable billet aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatisfying to use\u003c\/strong\u003e -Threaded with o-ring seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to install\u003c\/strong\u003e -One tool and you're done\u003cbr\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWHAT'S INCLUDED:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum washer cap\u003c\/li\u003e\n\u003cli\u003eO-ring seal\u003c\/li\u003e\n\u003cli\u003eAluminum collar\u003c\/li\u003e\n\u003cli\u003eCollar set screw \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cem\u003eDOWNLOAD \u003ca rel=\"noopener\" title=\"Download IEGAUU1 Install Guide\" href=\"https:\/\/cdn.performancebyie.com\/guides\/iE%20Billet%20Washer%20Cap%20Install%20Guide_IEGAUU1.pdf\" target=\"_blank\"\u003eINSTALL GUIDE\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch2\u003eWHATS IT FIT:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudi 8Y S3\u003c\/li\u003e\n\u003cli\u003eAudi 8Y RS3\u003c\/li\u003e\n\u003cli\u003eAudi 8V S3\u003c\/li\u003e\n\u003cli\u003eAudi 8V A3\u003c\/li\u003e\n\u003cli\u003eAudi 8V RS3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudi 4M SQ7\u003c\/li\u003e\n\u003cli\u003eAudi B8 S4\u003c\/li\u003e\n\u003cli\u003eAudi B8 A4\u003c\/li\u003e\n\u003cli\u003eAudi C7 A6\u003c\/li\u003e\n\u003cli\u003eAudi C7 S6\u003c\/li\u003e\n\u003cli\u003eAudi C7 S7\u003c\/li\u003e\n\u003cli\u003eAudi C7 A7\u003c\/li\u003e\n\u003cli\u003eVW MK8 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK8 Golf R\u003c\/li\u003e\n\u003cli\u003eVW MK7 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK7 Golf R\u003c\/li\u003e\n\u003cli\u003eVW MK7 GLI\u003c\/li\u003e\n\u003cli\u003eVW MK7 Golf \/ Alltrak\u003c\/li\u003e\n\u003cli\u003eVW MK7 Jetta\u003c\/li\u003e\n\u003cli\u003eVW Gen 1\/2 Tiguan\u003c\/li\u003e\n\u003cli\u003eVW MK6 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK6 Golf R\u003c\/li\u003e\n\u003cli\u003eVW MK6 GLI\u003c\/li\u003e\n\u003cli\u003eVW MK6 Golf\u003c\/li\u003e\n\u003cli\u003eVW MK6 Jetta\u003c\/li\u003e\n\u003cli\u003eVW MK5 GTI\u003c\/li\u003e\n\u003cli\u003eVW MK5 R32\u003c\/li\u003e\n\u003cli\u003eVW MK5 Jetta\u003c\/li\u003e\n\u003cli\u003eVW MK5 Rabbit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eIt should fit most engines with the common large blue flip-up plastic cap, such as VW\/Audi B7, B6, B5, C6, C5, MK4, and MK3 platforms.\u003c\/em\u003e\u003cbr\u003e \u003c\/p\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":42942514135179,"sku":"IEGAUU1","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/files\/IEGAUU1_01.jpg?v=1733964303"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/2605\/3231\/collections\/ENGINE_ACCESSORIES.jpg?v=1555367991","url":"https:\/\/performancebyie.com\/collections\/engine-accessories.oembed","provider":"Integrated Engineering","version":"1.0","type":"link"}